Как установить aris express
ARIS Express installation instructions
ARIS Express installation instructions
Overview
ARIS Express provides two different installation mechanisms depending on the target operating system. If you run into any trouble while installing ARIS Express, make sure your system meets the system requirements. Also, review the frequently asked questions (FAQ) as they already contain solutions to most installation and setup problems.
Select on which kind of operating system you want to install ARIS Express:
If you have not used ARIS Express before, you will need to configure ARIS Express on first start.
Installation on Microsoft Windows
For Microsoft Windows systems, an executable setup is provided. Follow these steps to install or upgrade ARIS Express on Microsoft Windows systems:
Installation on other systems
ARIS Express is not officially supported on any other operating system than Microsoft Windows. Still, users report that they are able installing ARIS Express on other systems such as Mac OS X and Linux using the following steps. In any case, make sure your system meets the system requirements. Pay special attention to the Java version required as this is the most often cause of installation problems. Also, review the frequently asked questions (FAQ) as they already contain solutions for most installation problems.
While downloading ARIS Express, you will see a dialog as shown in the following figure.
If you are experiencing problems while downloading like stalled downloads, take a look at the frequently asked questions (FAQ). The FAQ document also gives you an idea how long the download will take and how big the download package is.
If you want to create shortcuts on your desktop and an entry in your start menu (Windows), you need to confirm this integration into your desktop. This is recommended.
After the download was completed, ARIS Express is started automatically. Depending on the security settings of your system, you must confirm to start the application. Make sure to check the box «Always trust content from this publisher» so that you do not get asked this question on every start of ARIS Express.
ARIS Express first start
After successful installation, you can start ARIS Express. If you have not used ARIS Express before, you will need to configure ARIS Express on first start. A wizard guides through the configuration process. The configuration wizard provides detailed instructions for each configuration step on the left side of the wizard dialog.
You have to accept the license agreement of ARIS Express before you can proceed. You can only proceed and use ARIS Express if you confirm your acceptance by checking the box below the license agreement. After you have checked this box, the Next button is activated.
You need to register ARIS Express using your ARIS Community user account. Make sure to enter your community login and not your email address! Besides validating your account details, no additional data about your ARIS Express installation, your computer or about your person is transferred to ARIS Community. If you have not done so, you can create a new ARIS Community account free of charge.
After you entered your ARIS Community account details (username, password) and clicked the «Next» button, your account is checked against ARIS Community. If ARIS Express is unable to validate your input, you will be able to change your account details. If ARIS Express is not able to connect to ARIS Community, you cannot proceed. Read the frequently asked questions (FAQ) for possible solutions.
Choose the interface language of ARIS Express. ARIS Express is shipped with English and German user interface.
Complete the configuration wizard by clicking the «Finish» button. Now, ARIS Express starts. Before the main window of ARIS Express is shown, you will see the following splash screen. This splash screen is also shown later on every start of ARIS Express.
ARIS Express
Что такое ARIS Express?
Инструментарий ARIS Express от компании Software AG ориентирован на обычных пользователей и новичков в сфере BPM. Новый продукт семейства ARIS — это «Моделирование процессов для всех».
Инструментарий ARIS Express
Каждый может попробовать ARIS Express, ведь это мощный бесплатный BPM-инструмент. Инструмент ориентирован на новичков в моделировании процессов и обычных пользователей, не сильно продвинутых в ИТ, а также на университеты и студентов. Программное обеспечение для моделирования бизнес-процессов предлагается в качестве альтернативы таким используемым во многих компаниях инструментам для моделирования процессов, как MS Visio и MS PowerPoint.
Инструментарий поддерживает общепринятые стандартные нотации для описания бизнес-процессов и некоторых других предметных областей, таких как оргструктура, информационные системы и модели данных.
Каждый из поддерживаемых в инструменте типов моделей содержит набор типов объектов, наиболее часто используемых при создании моделей такого типа. Изображения моделей можно сохранять в файлах форматов EMF и PDF, а дополнительные сведения об объектах модели — в отчетах в форматах RTF и PDF.
Учитывая востребованность ARIS в крупных российских компаниях (включая такие отрасли, как телекоммуникационная, нефтегазовая, банковская, не говоря уже о многочисленных системных интеграторах), нельзя не отметить, что навыки, приобретенные при изучении этого инструмента будут востребованы.
Где скачать
ARIS Express можно бесплатно скачать на сайте сообщества ARIS Community (http://www.ariscommunity.com/aris-express). Продукт существует только с англоязычным интерфейсом. ARIS Express — бесплатный программный инструмент для начала работы с ARIS, он
идеально подходит для новичков в области BPM. Простой, инновационный интерфейс моделирования обеспечивает стабильные результаты.
Чего не умеет ARIS Express
Этот инструмент хорош для изучения технологии моделирования и для старта работ по моделированию бизнес-процессов, но его может оказаться недостаточно в больших проектах.
При появлении более 100 моделей в проекте обойтись таким легким инструментом становится тяжело, ведь он не может генерировать на основе моделей разнообразную документацию, стандарты, регламенты, управлять версиями моделей, поддерживать большее число типов моделей и объектов, публиковать модели на портале, осуществлять имитационное моделирование процессов. Всё это доступно в основных продуктах семейства ARIS.
Хотите бесплатный инструмент описания корпоративной архитектуры — скачать можно тут.
Учебный курс по инструментарию ARIS (описание).
Как скачать и установить Aris Express. Подробная инструкция
Программа для процессного моделирования ARIS Express в настоящий момент является бесплатной. Найти и скачать ее можно на различных сайтах, но в любом случае, откуда бы вы ее ни загрузили при установке она потребует подтверждения вашей регистрации на официальном сайте разработчика ARIS Express.
Исходя из этого, рекомендуем пройти несложную процедуру регистрации на сайте www.ariscommunity.com и после этого там же скачать программу ARIS Express. Ниже приведена подробная инструкция по скачиваю и установке программы.
1. Регистрируемся на официальном сайте ARIS Express
Переходим по ссылке, упомянутой выше, на официальный сайт ARIS Express.
Сайт на английском языке, поэтому для удобства можно использовать браузер, который позволяет делать перевод страниц на русский. Таким образом переведены страницы сайта в инструкции ниже.
В правом верхнем углу нажимаем на значок личного кабинета и во всплывающем окне выбираем «Зарегистрироваться».
Заполняем обязательные поля отмеченные звездочкой последовательно в каждой из трех форм для регистрации, нажимая каждый раз кнопку «Create new account».
После заполнения форм на указанный адрес электронной почты будет выслана ссылка для его подтверждения. Перейдя по ссылке попадаем на сайт с уведомлением:
Нажимаем «Log in», переходим на страницу ввода пароля. Придумываем пароль, нажимаем «Сохранить».
Вы успешно зарегистрировались на официальном сайте ARIS Express. После этого можно скачивать и устанавливать программу.
2. Скачиваем программу ARIS Express
Нажимаем «Скачать ARIS Express».
Принимаем лицензионное соглашение.
Выбираем файл для скачивания в зависимости от операционной системы компьютера и нажимаем для загрузки.
3. Устанавливаем программу ARIS Express
После загрузки устанавливаем программу, выбирая установку «Modify», следуем указаниям и заканчиваем установку.
После установки можно начинать работать. Проблем с открытием программы, как правило, не возникает.
Надеемся, что следуя приведенной выше инструкции вы сможете скачать ARIS Express и установить программу на компьютер без каких-либо проблем.
FAQ ARIS Express installation
FAQ ARIS Express installation
Frequently asked questions (FAQ)
This page collects the most often asked questions about ARIS Express. Please make sure to go through this list before posting a new support request. The first list of questions applies to all installations whereas the second list applies only to installations on Linux.
installation on Linux:
General questions
Do I need to install a database management system?
All you need to run ARIS Express is a recent Java Runtime Environment (JRE). See below how to install Java and which version you need. Everything else is shipped with ARIS Express, so you do not need any additional software installations.
How do I get a new version of ARIS Express?
ARIS Express has a built-in update mechanism. Each time you run ARIS Express and you are connected to the Internet, ARIS Express checks if a new version is available. If a new version is available, it will download and install it automatically. After restarting ARIS Express, you will be using the new version. If you are using an older version of Java, you will be asked if you want to install the update.
Do I need to be connected to the Internet to run ARIS Express?
No, but you need an Internet connection to install ARIS Express. After ARIS Express was started the first time successfully, you do not need an Internet connection anymore and you can work completely offline. It might be a good idea to start ARIS Express from time to time while you are connected to the Internet so that ARIS Express can download and install updates if available.
What data is transferred by ARIS Express to the Internet?
After you installed ARIS Express and registered it on first startup, no Internet connection is required to use ARIS Express. ARIS Express will not transfer any models you create to the Internet! If you decide to share your models with other members of ARIS Community, you can upload them. However, this is a manual step not done by ARIS Express.
If you are connected to the Internet while starting and using ARIS Express, it will transfer the following data:
During first startup of ARIS Express, I am asked to enter account information. Where do I get an account?
You must be a registered member of ARIS Community in order to run ARIS Express. Support for ARIS Express is only provided on ARIS Community. If you have not done so, you can create a new account as follows:
After your first login, you can use your account information (username, password) to register ARIS Express.
Am I allowed to give someone else my ARIS Community account information so that the person can register ARIS Express?
An ARIS Community account belongs to a single person. It is not allowed to share your account details with anyone else. See the ARIS Community Guidelines and the Terms of Use for the legal requirements. Therefore, every ARIS Express user must have an own ARIS Community account. If you have not done so, get your free ARIS Community here.
In the end, there is also no real need to share ARIS Community accounts. Registration is free of charge and if you do not agree, we won’t contact you. ARIS Community is the single support source for ARIS Express, so you will need an account to post your questions there.
I cannot register ARIS Express, because the registration wizard does not get connected to ARIS Community. What is going wrong?
Basically, there are 3 things, which might cause this problem:
In the second case, you have to configure the proxy server, which should be used by ARIS Express to access the Internet. This is done in the Java Control Panel as follows:
In the third case, you could try the following:
How do I remove ARIS Express from my computer?
You can remove ARIS Express like any Windows application in the “Software” section of the system control panel.
After removing ARIS Express, you can install it again by downloading it from ARIS Community. The removal routine of Windows does not remove the user settings. Those settings are located in your home directory in a folder called “ARISExpress”. If you remove this folder, all your personal settings will be gone.
What is Java and why do I need to install it?
ARIS Express is a Java application. Java is a programming framework provided free of charge and maintained by Oracle/SUN Microsystems. In order to run ARIS Express, you need Java to be installed on your computer. Installing Java can be done as follows:
Which Java version do I need?
ARIS Express needs at least Java Runtime Environment 1.6.0_10. However, we recommend to use 1.6.0_14 or above, because those versions contain some important performance enhancements.
If you experience problems installing ARIS Express under Java 7, either try using the alternative download method or use Java 6 instead. We will update ARIS Express as soon as possible.
Why do I have to install ARIS Express again on each startup or after each reboot of the operating system?
ARIS Express is not installed as an ordinary application, but it is started directly from the Internet as a so called Java Web Start application. This Java Web Start technology takes care of caching the files you downloaded. If you have to download ARIS Express every time you try to start it, this cache is either turned off or too small to store ARIS Express completely. Adjusting the settings of the Java Web Start cache is done as follows.
Can I change the location where ARIS Express is installed?
ARIS Express is installed in the Java cache directory. By default, the Java cache is stored in your user profile. You can change the location of the Java cache in the System Control Panel. Open the System Control Panel and open the Java Control Panel. Make changes to the path as needed.
I am using a cleaning software. How to make sure ARIS Express doesn’t get deleted?
Some users report that they are using a software, which automatically removes any new files from the user profile. Such software may also remove the ARIS Express installation, because it is installed in the Java cache directory, which is usually stored in the user profile.
The only solution to this problem is either to exclude the Java cache directory from getting removed on each startup or to set a new path for the Java cache outside of the user profile. Those settings must be done outside of ARIS Express.
What can I do when I can’t find find the desktop icon for ARIS Express or the start menu entry?
This will install the icon on your desktop and also create the file type assignment.
Installation on non Microsoft Windows systems
After clicking the download link, I get a «Java» screen, which disappears after some minutes, but ARIS Express is not installed. What is wrong?
If you download ARIS Express on a non Microsoft Windows system, the following screen should be shown for some seconds:
This screen should disappear after a few seconds. If this is not the case, your browser or Java is not able to download ARIS Express. This problem is probably caused by wrong proxy server settings. See the question above how to fix that.
While clicking on the ARIS Express download link, my browser downloads a file called “express.jnlp”, but ARIS Express is not started. What is going wrong?
There might be several reasons for this. First, make sure that you have a current version of Java installed:
If Java is installed correctly, it might be that JNLP files are not correctly associated with Java. This can be resolved as follows:
As soon as you have installed ARIS Express, there is no need to execute the “express.jnlp” file again or click on the belonging link on ARIS Community. ARIS Express is shown as a desktop icon and an entry is added to your programs menu.
The download seems to be stalled. How do I continue?
Whenever the download dialog tells you that the download is halted: do not bother! The download will proceed after a while. The download package of ARIS Express consists of several files. After a collection of files was downloaded, they get extracted and installed before the download continues. During extraction and installation, the download dialog says the download was halted. The time needed for extraction and installation depends on the performance of your computer.
How do I proceed if the download fails saying that the download file is broken?
Sometimes it is necessary to explicitly configure the proxy settings for Java and to not rely on the browser settings. The following steps show how to proceed:
I can’t download ARIS Express if I specified a PAC file for automated proxy settings. Why?
Browsers allow you to specify a PAC file containing the correct proxy settings. Unfortunately, Java Webstart does not correctly support those files in all cases.
If you are experiencing problems while downloading ARIS Express, make sure that you are not using automated proxy discovery through a PAC file. See the descriptions above how to set correct proxy settings for Java.
Why does ARIS Express download something on each startup?
The files used for ARIS Express installation are distributed on a global content delivery network (CDN) to ensure fast download speeds for everyone. Unfortunately, the Java technology used by ARIS Express does not fully support such a CDN. Instead, Java sometimes «thinks» that the current installation of ARIS Express is broken and that files must be downloaded again to fix the installation.
If you experience downloads on (almost) each startup, follow these steps to get around this problem:
Keep in mind that this fix might stop working at any time if the above IP address changes for your location. In that case you need to get the latest IP address using the ping command and update your hosts file.
Моделирование бизнес процессов с помощью ARIS (express and cloud)
Моделирование бизнес процессов является одним из методов улучшения качества и эффективности работы организации. В основе этого метода лежит описание процесса через различные элементы (действия, данные, события, материалы и пр.) присущие процессу. Как правило, моделирование бизнес процессов описывает логическую взаимосвязь всех элементов процесса от его начала до завершения в рамках организации. В более сложных ситуациях моделирование может включать в себя внешние по отношению к организации процессы или системы.
Моделирование бизнес процессов позволяет понять работу и провести анализ организации. Это достигается за счет того, что модели могут быть составлены по различным аспектам и уровням управления. В больших организациях моделирование бизнес процессов выполняется более подробно и многограннее, чем в малых, что связано с большим количеством кросс-функциональных связей.
Цели бизнес моделирования:
ARIS (акроним от англ. Architecture of Integrated Information Systems) — методология и тиражируемый программный продукт для моделирования бизнес-процессов организаций. Продукт и методология принадлежат немецкой компании Software AG как результат поглощения компании IDS Scheer автора методологии Августа-Вильгельма Шеера.
Реализация методологии предполагается с задействованием специализированного программного продукта, обеспечивающего совместную работу над описаниями и диаграммами. Первая версия продукта выпущена в 1994 году. К концу 2000 года продукт был продан в 24 тыс. организаций. С 2009 года поставляется бесплатная версия инструмента — ARIS Express.
Продукт предусматривает серверную часть (ARIS Server) с централизованным репозиторием, хранимым в реляционной СУБД и серию пользовательских инструментов для ведения объектов и подготовки графических представлений (ARIS Toolset в ранних версиях, в версиях 2000-х годов — ARIS Business Architect, ARIS Designer).
К середине 2010-х годов также появилась публично-облачная версия продукта. Доступная по адресу http://www.ariscloud.com/
Продукт ARIS используется в различных проектах по реинжинирингу и оптимизации бизнес-процессов, ИТ-проектах типа внедрения и эксплуатации ERP-систем, в частности, есть проработанное интеграционное решение для SAP R/3.
Одна из иллюстраций структурированного подхода ARIS к проекту реинжиниринга
Программное обеспечение ARIS составляет основу пакета Business Process Analysis Suite корпорации Oracle. Технически инструментарий ARIS достаточно простой для изучения, имеет интуитивно понятный интерфейс. Модели копируются и вставляются в файлы документов (например, формата Microsoft Word) в виде рисунков.
В продуктах ARIS предусмотрена возможность создания сценариев автоматизации составления различных аналитических отчётов, нормативных документов, новых моделей. Каждый сценарий представляет собой подпрограмму, запускаемую в ARIS Business Architect (либо Toolset — более ранней версии) или непосредственно на сервере ARIS. Сценарии пишутся на специальном языке программирования — SAX Basic. Для автоматизированного формирования того или иного отчёта в ARIS сценарии оперируют данными из базы моделей, вычленяя из неё конкретные объекты и модели.
Например любая организация в методологии ARIS рассматривается с пяти точек зрения: организационной, функциональной, обрабатываемых данных, структуры бизнес-процессов, продуктов и услуг. При этом каждая из этих точек зрения разделяется ещё на три подуровня: описание требований, описание спецификации, описание внедрения. Для описания бизнес-процессов предлагается использовать около 80 типов моделей, каждая из которых принадлежит тому или иному аспекту.
ARIS предоставляет визуальный инструментарий для обеспечения наглядности моделей. Также инструментарий поставляется с набором референтных моделей, заранее разработанных для типичных процессов в различных отраслях.
Общий принцип в инструментарии — возможность интеграции моделей разных типов в рамках одного репозитория посредством декомпозиции (детализации) объектов. Таким образом, любую организацию можно описать с помощью иерархии моделей — от обобщения: например, VACD (англ. value added chain diagram) до уровня процедур и ресурсного окружения функций.
Среди большого количества возможных методов описания можно выделить следующие:
Основные элементы, используемые в нотации ARIS:
Доступные типы моделей в Aris express: organization chart, process landscape, business process, data model, IT infrastructure, system landscape, BPMN diagram, whiteboard, general diagram.
Пример диаграмм:
Organizational chart
Process landscape (VAD)
Business process (EPC (event-driven process chain)
BPMN (business process modeling notation (BPMN 2.0))
Нотация BPMN описывает условные обозначения для отображения бизнес-процессов в виде диаграмм бизнес-процессов. BPMN ориентирована как на технических специалистов, так и на бизнес-пользователей. Для этого язык использует базовый набор интуитивно понятных элементов, которые позволяют определять сложные семантические конструкции. Кроме того, спецификация BPMN определяет, как диаграммы, описывающие бизнес-процесс, могут быть трансформированы в исполняемые модели на языке BPEL. Спецификация BPMN 2.0 также является исполняемой и переносимой (то есть процесс, нарисованный в одном редакторе от одного производителя, может быть исполнен на движке бизнес-процессов совершенно другого производителя, при условии, если они поддерживают BPMN 2.0).
Облачная версия aris cloud включает в себя 4 типа диграмм: EPC, OC, VAD, application system type diagram
Бесплатная версия программы т.е ARIS EXPRESS поддерживает только базовые типы диаграмм, не имеет многопользовательской поддержки (ARIS CLOUD поддерживает), не использует базу данных, не содержит инструментов для формирования отчётов и средств анализа модели. ARIS Express не поддерживает связи между создаваемыми объектами в отличие от полноценной платной версии, то есть отсутствует контроль целостности и непротиворечивости модели. Это означает, что при редактировании одной модели программа не будет вносить соответствующие изменения в другую модель, а также не будет проверять существуют ли должности, указываемые в качестве ответственных в процессе и т.д.